Radarcape:SD Card Howto: Difference between revisions

From Beast Wiki
Jump to navigation Jump to search
imported>Beastadmin
No edit summary
(update BBW image)
 
(32 intermediate revisions by 3 users not shown)
Line 1: Line 1:
=Howto Install the Linux OS on the Radarcape=
{{#seo:
|title=Create Radarcape SD Card
|titlemode=replace
|keywords=radarcape,sd,card,howto,create,beaglebone,white
|description=How to create a new SD card for your Radarcape (Beaglebone white, only)
}}


This page describes how you can install a Linux system on the SD card. This is a bring up from zero and is necessary if you want to start from the beginning or if major changes have been applied to the Linux itself. A new SD card can be created either directly on the Radarcape or using an external Linux PC.


{|
|[[File:Expert.png|For Experts]]
|''Required Unix/Linux skills to execute this task: Advanced''
|}


==Restore the SD Card Using the Radarcape And a SD Card Reader==
__TOC__


===Prerequisites===
This page describes how you can install a Linux system on the SD card. This is a bring up from zero and is necessary if you want to start from the beginning or if major changes have been applied to the Linux itself. A new SD card can be created either directly on the Radarcape or using an external Linux PC.
 
* A capability to write 4GB size SDHC Micro-SD cards on the Radarcape and an USB SD card reader (I am using a Kingston FCR-HS219).
* [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty] SSH client for Windows installed on your PC.
* Putty can be used for both, the back side serial port via USB-Serial as well as for a SSH console via network. The network name of the Radarcape is given on the sticker on the device, e.g. rc22. The account name is root and normally there is no password, so only press enter when beeing asked for the password.<br />(Note: However, when mounting network drives using samba, there is a password for root, that is different to the one for login)
* [http://www.ftdichip.com/Drivers/VCP.htm FTDI VCP Driver] installed on your PC
* Eventually a micro USB cable for the rear USB port (the one besides the SMA connector)
* An Internet connection for the Radarcape
 
 
===Create the SD Card===
 
For this step, you need a SDHC capable SD card reader connected to the front side USB expansion port of your Beaglebone. I am using a Kingston FCR-HS219 SD card for this purpose. Keep the SD card removed in order to meet below description
 
After connecting, you need to reset your Radarcape. Either power cycle it or enter “reboot” if you already have a console opened on the Linux. After rebooting, establish a Putty terminal connection to your Radarcape. Preferably to the back side USB console, but SSH will do as well.
 
Now enter the command
 
<source lang="bash">dmesg | grep " sd "</source>
 
The output will show if the SD card reader was detected properly, it should tell you somehow
 
<source lang="text">
[    3.021715] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    3.034153] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[    3.045395] sd 0:0:0:2: [sdc] Attached SCSI removable disk
[    3.058879] sd 0:0:0:3: [sdd] Attached SCSI removable disk
</source>
 
Now insert the SD card into the matching slot. If your connection is the back side USB, you will see below message on the screen anyway, otherwise enter above command again. Look for lines like this:
 
<source lang="text">
[  81.515519] sd 0:0:0:3: [sdd] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
[  81.530594] sd 0:0:0:3: [sdd] No Caching mode page present
[  81.536033] sd 0:0:0:3: [sdd] Assuming drive cache: write through
[  81.550295] sd 0:0:0:3: [sdd] No Caching mode page present
[  81.555742] sd 0:0:0:3: [sdd] Assuming drive cache: write through
</source>
 
This means that a 3.96GB card was inserted into drive sdd. Remember this drive name.
 
Next step is to download and run the install skript from the server. Enter the commands below
 
<source lang="bash">
rm -rf bb_make-Angstrom-new.sh
wget http://www.modesbeast.com/resources/bb_make-Angstrom-new.sh
sh ./bb_make-Angstrom-new.sh sdd
</source>
 
Remember that in the 3rd line you eventually need to replace sdd in case that your SD card is not named sdd Answer the questions and else let the script go.
 
After a short while the SD card is ready. Then swap the SD cards and store the one used until now on a safe place until your new card is operating correctly. '
 
 
==Restore the SD Card Image on Native Linux==
 
===Prerequisites===
 
* A PC running with any Linux OS (e.g., [http://www.ubuntu.com Ubuntu Linux]).
* The capability to write 4GB size SDHC Micro-SD cards on the Linux PC and an USB SD card reader (I am using a Kingston FCR-HS219).
* SSH Client (e.g., Putty on Windows, OpenSSH on Linux)
* An Internet connection for the Linux PC and the Radarcape
 
===Create SD Card===
 
* Remove power from your Radarcape
* Remove the front panel of your Radarcape
* Remove the SD card and put it into the SD card reader of your Linux PC
* Download the script Angstrom installation script
 
 
<source lang="bash">wget http://www.modesbeast.com/resources/make-Angstrom-new.sh</source>
 
 
* Execute it with the drive name of your SD card


==Restoring an SD card for Radarcape with Beaglebone White using Windows==


<source lang="bash">sh ./make-Angstrom-new.sh [mmcblk0|sdd]</source>
'''Prerequisites:''' You need a 4GB SDHC capable SD card reader connected or built in at your local computer.


There are two images, please select the one according to your SD card. If you do not have either a Sandisk or Kingston SD card, simply try. This is a fully working version of the given release, including the Radarcape installation. Hostname is radarcape.


* Place the updated SD card in the SD card reader of the Radarcape
[http://www.jetvision.de/resources/RC-BBW-Debian-4.1.30-ti-r60-181116.1000.02.zip Debian Distribution: Sandisk 4GB image with Release 181116]
* Apply the front panel of your Radarcape
* Apply power to your Radarcape


# Get the Windiskimager from http://sourceforge.net/projects/win32diskimager/
# Unzip the downloaded Windiskimager file, Windiskimager does not need installation, the extracted files work directly
# Download the image from above link
# Unzip the downloaded Radarcape SD image
# Using Windiskimager, write the image to the SD card. '''Carefully select the device that it is written to. Better unplug all other USB storages.'''
# After your Radarcape is back in operation, you may want to update to the latest release
<p>
[[File:windiskimager.png|none|frame|thumb|Windiskimager in operation]]


==Install Radarcape Software==
===True Miscellaneous===


Install the Radarcape daemon and the FPGA Firmware as decribed [[Radarcape:Update Procedure|here]].
Packages required to create an SD card on a Radarcape:
* opkg install e2fsprogs-mke2fs rsync
* opkg install dosfstools

Latest revision as of 15:33, 24 February 2019


For Experts Required Unix/Linux skills to execute this task: Advanced

This page describes how you can install a Linux system on the SD card. This is a bring up from zero and is necessary if you want to start from the beginning or if major changes have been applied to the Linux itself. A new SD card can be created either directly on the Radarcape or using an external Linux PC.

Restoring an SD card for Radarcape with Beaglebone White using Windows

Prerequisites: You need a 4GB SDHC capable SD card reader connected or built in at your local computer.

There are two images, please select the one according to your SD card. If you do not have either a Sandisk or Kingston SD card, simply try. This is a fully working version of the given release, including the Radarcape installation. Hostname is radarcape.

Debian Distribution: Sandisk 4GB image with Release 181116

  1. Get the Windiskimager from http://sourceforge.net/projects/win32diskimager/
  2. Unzip the downloaded Windiskimager file, Windiskimager does not need installation, the extracted files work directly
  3. Download the image from above link
  4. Unzip the downloaded Radarcape SD image
  5. Using Windiskimager, write the image to the SD card. Carefully select the device that it is written to. Better unplug all other USB storages.
  6. After your Radarcape is back in operation, you may want to update to the latest release

Windiskimager in operation

True Miscellaneous

Packages required to create an SD card on a Radarcape:

  • opkg install e2fsprogs-mke2fs rsync
  • opkg install dosfstools
Retrieved from "https://wiki.jetvision.de/index.php?title=Radarcape:SD_Card_Howto&oldid=3322"