Radarcape:Planeplotter Feeding: Difference between revisions

From Beast Wiki
Jump to navigation Jump to search
imported>Beastadmin
No edit summary
imported>Beastadmin
No edit summary
Line 7: Line 7:
[[File:Settings Planeplotter Feeder.png|frame|none|Configuration of the Planeplotter Feeder]]
[[File:Settings Planeplotter Feeder.png|frame|none|Configuration of the Planeplotter Feeder]]


You can request a registration key for the Planeplotter network via the [http://www.coaa.co.uk/rpi-request.htm Software Registration Request] Web page.
You can request a registration number and authorization key for the Planeplotter network via the [http://www.coaa.co.uk/rpi-request.htm Software Registration Request] Web page.


The Radarcape provides a status dialogue for all feeders. It shows the feeder output during the startup sequence and the latest 15 messages generated by the feeder.
The Radarcape provides a status dialogue for all feeders. It shows the feeder output during the startup sequence and the latest 15 messages generated by the feeder.

Revision as of 18:38, 17 January 2015

The Radarcape comes with a pre-installed feeder for the Planeplotter network.

Attention: This page is about feeding data directly to the Planeplotter network. Please look at the Planeplotter page if you want to connect your local Planeplotter software with the Radarcape.

The Planeplotter feeder options can be found on the Settings page of your Radarcape.

Configuration of the Planeplotter Feeder

You can request a registration number and authorization key for the Planeplotter network via the Software Registration Request Web page.

The Radarcape provides a status dialogue for all feeders. It shows the feeder output during the startup sequence and the latest 15 messages generated by the feeder.