Radarcape:Planeplotter Feeding: Difference between revisions

From Beast Wiki
Jump to navigation Jump to search
imported>Beastadmin
No edit summary
imported>Beastadmin
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
Attention: This page is about feeding data directly to the Planeplotter network. Please look at the [[Radarcape:Planeplotter|Using Planeplotter with the Radarcape]] page if you want to connect your local Planeplotter software with the Radarcape.
{{#seo:
|title=Radarcape PlanePlotter Network Feeding
|titlemode=replace
|keywords=radarcape,feeding,planeplotter,network
|description=How to configure your Radarcape for feeding to the PlanePlotter network
}}


The Radarcape comes with a pre-installed feeder for the [http://www.coaa.co.uk/planeplotter.htm Planeplotter] network. The Planeplotter feeder options can be found on the ''Settings'' page of your Radarcape.
{|
|[[File:Beginner.png|For Beginners]]
|''Required computer skills to execute this task: Beginner''
|}


[[File:Settings Planeplotter Feeder.png|frame|none|Configuration of the Planeplotter Feeder]]
Attention: This page is about feeding data directly to the PlanePlotter network. Please look at the [[Radarcape:Planeplotter|Using PlanePlotter with the Radarcape]] page if you want to connect your local PlanePlotter software with the Radarcape.


You can request a registration number and authorization code for the Planeplotter network via the [http://www.coaa.co.uk/rpi-request.htm Software Registration Request] Web page.
The Radarcape comes with a pre-installed feeder for the [http://www.coaa.co.uk/planeplotter.htm PlanePlotter] network. The PlanePlotter feeder options can be found on the ''Settings'' page of your Radarcape.


The Radarcape provides a status Web page for every feeder. It shows the feeder output during the startup sequence and the latest 15 messages generated by the feeder.
[[File:Settings Planeplotter Feeder.png|frame|none|Configuration of the PlanePlotter Feeder]]
 
You can request a registration number and authorization code for the PlanePlotter network via the [http://www.coaa.co.uk/rpi-request.htm Software Registration Request] webpage.
 
The Radarcape provides a status webpage for every feeder. It shows the feeder output during the startup sequence and the latest 15 messages generated by the feeder.

Latest revision as of 11:05, 26 April 2015


For Beginners Required computer skills to execute this task: Beginner

Attention: This page is about feeding data directly to the PlanePlotter network. Please look at the Using PlanePlotter with the Radarcape page if you want to connect your local PlanePlotter software with the Radarcape.

The Radarcape comes with a pre-installed feeder for the PlanePlotter network. The PlanePlotter feeder options can be found on the Settings page of your Radarcape.

Configuration of the PlanePlotter Feeder

You can request a registration number and authorization code for the PlanePlotter network via the Software Registration Request webpage.

The Radarcape provides a status webpage for every feeder. It shows the feeder output during the startup sequence and the latest 15 messages generated by the feeder.