Radarcape:Planeplotter Feeding: Difference between revisions

From Beast Wiki
Jump to navigation Jump to search
imported>Beastadmin
No edit summary
imported>Beastadmin
No edit summary
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
The Radarcape comes with a pre-installed feeder for the [http://www.coaa.co.uk/planeplotter.htm Planeplotter] network.
{{#seo:
|title=Radarcape PlanePlotter Network Feeding
|titlemode=replace
|keywords=radarcape,feeding,planeplotter,network
|description=How to configure your Radarcape for feeding to the PlanePlotter network
}}


Attention: This page is about feeding data directly to the Planeplotter network. Please look at the [[Radarcape:Planeplotter|Planeplotter]] page if you want to connect your local Planeplotter software with the Radarcape.
{|
|[[File:Beginner.png|For Beginners]]
|''Required computer skills to execute this task: Beginner''
|}


The Planeplotter feeder options can be found on the ''Settings'' page of your Radarcape.
Attention: This page is about feeding data directly to the PlanePlotter network. Please look at the [[Radarcape:Planeplotter|Using PlanePlotter with the Radarcape]] page if you want to connect your local PlanePlotter software with the Radarcape.


[[File:Settings Planeplotter Feeder.png|frame|none|Configuration of the Planeplotter Feeder]]
The Radarcape comes with a pre-installed feeder for the [http://www.coaa.co.uk/planeplotter.htm PlanePlotter] network. The PlanePlotter feeder options can be found on the ''Settings'' page of your Radarcape.


You can request a registration number and authorization key for the Planeplotter network via the [http://www.coaa.co.uk/rpi-request.htm Software Registration Request] Web page.
[[File:Settings Planeplotter Feeder.png|frame|none|Configuration of the PlanePlotter Feeder]]


The Radarcape provides a status dialogue for all feeders. It shows the feeder output during the startup sequence and the latest 15 messages generated by the feeder.
You can request a registration number and authorization code for the PlanePlotter network via the [http://www.coaa.co.uk/rpi-request.htm Software Registration Request] webpage.
 
The Radarcape provides a status webpage for every feeder. It shows the feeder output during the startup sequence and the latest 15 messages generated by the feeder.

Latest revision as of 11:05, 26 April 2015


For Beginners Required computer skills to execute this task: Beginner

Attention: This page is about feeding data directly to the PlanePlotter network. Please look at the Using PlanePlotter with the Radarcape page if you want to connect your local PlanePlotter software with the Radarcape.

The Radarcape comes with a pre-installed feeder for the PlanePlotter network. The PlanePlotter feeder options can be found on the Settings page of your Radarcape.

Configuration of the PlanePlotter Feeder

You can request a registration number and authorization code for the PlanePlotter network via the Software Registration Request webpage.

The Radarcape provides a status webpage for every feeder. It shows the feeder output during the startup sequence and the latest 15 messages generated by the feeder.