Radarcape:Planeplotter

From Beast Wiki
Revision as of 15:44, 6 October 2013 by imported>Beastadmin
Jump to navigation Jump to search

This manual describes how to connect Planeplotter with the Radarcape.

Step 1: Download, install, and start Planeplotter


Step 2: Options -> IO-Settings

Planeplotter Input/Output Settings


Step 3: Options -> Mode-S Receiver -> Beast Receiver -> Setup TCP/IP Client

Planeplotter TCP/IP Settings

Replace beaglebone-3 with the DNS name or IP address of your Radarcape (e.g., rc11.home:10002).


Step 4: Press green start button